AMERICAN INTERNATIONAL VENTURES, Inc

Home
Mission Statement
Holdings
Press Release
Officers & Directors
SEC EDGAR Filings

Bruner Assay Results

Complete assay results are provided below for the drilling at AIVN's Bruner property as described in the Company's press release dated July 6, 2004. The drilling was done with HQ diamond core and was conducted to follow-up previous reverse air circulation drilling on the property. The assays from the core drilling are similar to the results from the previous reverse air circulation drilling.

The drill core was logged and split, and one half of the core was shipped to American Assay Laboratories in Reno, Nevada for analysis. American Assay analyzed the samples by fire assay with an AA finish, and samples greater than 10,000 ppb Au were re-assayed with a gravimetric finish. A 32 element ICP scan was also run on all of the samples, but those results are not reported here. American Assay uses control standards, duplicates and blanks to inserted into the sample stream to assure quality control and lab performance.

AIVN's geologists are evaluating the drilling results together with recent surface geological mapping and sampling. The higher-grade intercepts encountered in the drilling may provide clues as to the presence and location of possible high-grade targets at depth, similar to Newmont's Ken Snyder mine. Additional drilling will be required to test this potential.

Drill Hole 180-04 Bearing: S55E Inclination: -60^o

From (ft)	To (ft)	Au (opt)	Dup Au (opt)
0.0	5.0	0.001	0.001
5.0	7.0	0.001
7.0	8.6	<0.001
8.6	12.6	0.003
12.6	17.8	0.001
17.8	22.7	0.001
22.7	24.1	0.006	0.008
24.1	25.6	0.002
25.6	27.8	0.002	0.002
27.8	32.7	0.002
32.7	37.8	<0.001
37.8	39.6	<0.001
39.6	42.2	<0.001
42.2	47.6	<0.001
47.6	52.6	<0.001
52.6	58.0	0.002
58.0	59.7	<0.001
59.7	63.0	<0.001
63.0	68.0	<0.001
68.0	72.8	<0.001
72.8	74.1	<0.001
74.1	75.8	<0.001
75.8	76.7	<0.001
76.7	81.5	<0.001
81.5	85.1	<0.001
85.1	90.4	<0.001
90.4	95.8	0.001
95.8	97.8	0.002
97.8	100.4	0.003
100.4	104.0	0.005
104.0	106.4	0.011
106.4	111.7	0.015	0.016
111.7	114.6	0.001
114.6	117.3	0.009	0.010
117.3	121.1	0.015	0.015
121.1	126.4	0.025
126.4	131.7	0.023
131.7	137.0	0.002
137.0	142.0	0.005
142.0	143.8	0.007
143.8	144.2	0.007	0.005
144.2	152.6	0.002
152.6	157.9	0.007

Drill Hole 181-04 Bearing: N53E Inclination: -45^o

From (ft)	To (ft)	Au (opt)	Dup Au (opt)
2.7	7.0	<0.001
7.0	12.2	0.002
12.2	17.6	0.004
17.6	22.6	0.003
22.6	28.2	0.002
28.2	32.6	0.002
32.6	34.0	0.005
34.0	39.3	0.013	0.014
39.3	42.7	0.005
42.7	45.3	0.053
45.3	50.0	0.006
50.0	52.6	0.007
52.6	58.1	0.025	0.027
58.1	62.6	0.006	0.007
62.6	68.0	0.005
68.0	72.7	0.003
72.7	75.7	0.257
75.7	77.7	0.008
77.7	81.4	0.031
81.4	84.6	0.018
84.6	87.0	0.094
87.0	89.7	0.012
89.7	92.6	0.015
92.6	97.8	0.014
97.8	101.4	0.008
101.4	103.4	0.005
103.4	105.0	0.018
105.0	108.8	0.013
108.8	111.1	0.006
111.1	114.6	0.017	0.017
114.6	117.3	VOID
117.3	121.1	0.002
121.1	125.0	0.004
125.0	127.8	0.004
127.8	131.2	0.002
131.2	134.4	<0.001
134.4	135.7	0.009
135.7	140.2	0.002
140.2	141.2	0.002	0.003
141.2	146.6	0.003
146.6	152.0	0.009

Drill Hole 182-04 Bearing: S60E Inclination: -45^o

From (ft)	To (ft)	Au (opt)	Dup Au (opt)
3.0	8.0	0.003
8.0	13.7	0.001
13.7	16.0	0.002
16.0	19.9	<0.001
19.9	22.5	0.001
22.5	26.5	0.007	0.007
26.5	30.3	0.012	0.012
30.3	32.0	0.001
32.0	35.0	0.059	0.064
35.0	37.7	0.049
37.7	42.5	0.015
42.5	47.9	0.020
47.9	52.3	0.172	0.165
52.3	57.2	0.009

Drill Hole 183-04 Bearing: N23E Inclination: -45^o

From (ft)	To (ft)	Au (opt)	Dup Au (opt)
3.0	5.1	0.004
5.1	10.0	0.022	0.021
10.0	14.7	0.006
14.7	18.1	0.004
18.1	20.5	0.004	0.004
20.5	25.5	0.008
25.5	30.8	0.001
30.8	35.7	<0.001
35.7	40.5	0.001
40.5	45.7	<0.001
45.7	50.5	<0.001
50.5	55.6	<0.001
55.6	60.5	<0.001
60.6	65.8	<0.001
65.8	70.6	<0.001
70.6	75.9	<0.001
75.9	80.6	0.002
80.6	85.9	<0.001
85.9	90.6	0.023
90.6	95.6	0.015
95.6	100.0	0.023
100.0	102.3	0.065	0.066
102.3	106.2	0.021	0.021
106.2	109.5	0.013
109.5	114.8	0.002
114.8	120.0	0.002
120.0	125.3	0.003
125.3	129.0	0.003
129.0	134.5	0.010
134.5	136.0	0.020	0.021
136.0	140.0	0.012
140.0	142.0	0.006
142.0	144.7	0.081
144.7	146.9	0.061
146.9	150.0	0.003

Drill Hole 184-04 Bearing: N75E Inclination: -43^o

From (ft)	To (ft)	Au (opt)	Dup Au (opt)
0.0	4.0	<0.001	<0.001
4.0	6.1	<0.001
6.1	7.8	0.002
7.8	10.5	0.009	0.009
10.5	15.5	0.002
15.5	20.5	0.005
20.5	24.8	<0.001
24.8	30.1	0.001	0.001
30.1	35.4	<0.001
35.4	40.5	<0.001
40.5	45.6	<0.001
45.6	50.6	<0.001
50.6	54.5	0.009	0.009
54.5	55.5	0.002
55.5	59.7	0.051
59.7	62.5	0.303	0.367
62.5	66.5	0.014
66.5	69.1	0.088
69.1	74.6	0.087
74.6	78.0	0.042
78.0	79.5	0.022
79.5	83.5	0.024
83.5	84.8	0.010
84.8	87.3	0.002
87.3	89.9	0.005
89.9	93.5	0.004
93.5	96.5	0.002
96.5	100.5	0.001
100.5	105.7	0.002
105.7	110.5	0.014	0.019
110.5	113.8	0.009
113.8	119.2	0.005
119.2	124.1	0.008

Drill Hole 185-04 Bearing: S80E Inclination: -43^o

From (ft)	To (ft)	Au (opt)	Dup Au (opt)
0.0	2.5	0.002
2.5	7.5	<0.001
7.5	9.1	0.065	0.067
9.1	12.3	<0.001
12.3	15.3	0.002
15.3	16.1	0.002
16.1	20.5	<0.001
20.5	25.6	<0.001
25.6	30.5	0.006	0.006
30.5	35.8	<0.001
35.8	37.3	0.074	0.079
37.3	40.0	0.005
40.0	42.7	0.006
42.7	47.7	0.041
47.7	50.5	0.003
50.5	55.8	0.030
55.8	60.5	0.006
60.5	64.2	0.013	0.014
64.2	69.1	0.003
69.1	74.4	0.002
74.4	79.7	0.004	0.004
79.7	85.0	0.009
85.0	90.3	0.003
90.3	95.5	0.006
95.5	100.6	0.011	0.012
100.6	105.9	0.009
105.9	110.5	0.002
110.5	115.5	0.002
115.5	120.5	0.012
120.5	125.8	0.032	0.034

Hit Counter

ANDY WARHOL